Coir wattle
Contour lines on slopes, cut faces and embankments
View detailsCoir wattles are rolls of coir fibre in netting, laid across a slope along the contour. Each one breaks up the water running down the slope, slowing it and letting the silt it carries settle out behind the roll.
Natural-fibre silt fences do the same job at the edge of a site: set upright on stakes around perimeters and drains, they hold sediment back while water passes through. Both are supplied to your project requirements.
Breaks long slopes into short runs so water loses speed.
Sediment settles behind the barrier instead of leaving the site.
Flexible rolls bend to follow the shape of the slope.
Set in a shallow trench and staked in place by hand.
Seed and plants can establish in and behind the fibre.
Natural fibre that breaks down after the job is done.
Coir wattles and natural-fibre silt fences are made to the site. These are the usual starting points.
| Property | Coir wattle |
|---|---|
| Fill | 100% coir fibre |
| Netting | Coir twine |
| Diameter | From 20 cm (8″); larger to project |
| Lengths | 3 to 6 m; other lengths to project |
| Silt fence height | To site requirement |
| Packing | Labelled by size and lot number |
We sample each production lot and send it to an independent laboratory. These are the properties measured, the method used, and what each one tells you. The report carries the lot number printed on your labels and travels with the shipment.
The Coir Board’s research institute and coir geotextile laboratory, set up to test to ASTM methods and recognised by BIS for coir bhoovastra work.
Independent textile and geosynthetics laboratories accredited by India’s National Accreditation Board for Testing and Calibration Laboratories.
Inspection and sampling by an agency you appoint before the container is sealed.
| Property tested | Method | What it tells you |
|---|---|---|
| Diameter and length | Measured per lot | Logs match the size ordered |
| Weight per metre and fill density | Measured per lot | Firmness of the fill, set to the water conditions |
| Netting mesh size | IS 15868 | Netting holds the fill and lets roots through |
| Netting yarn breaking load | Yarn tensile test | Strength of the netting that holds the log together |
| Moisture content | Oven-dry method | Fibre is shipped dry and stable for transit |
Typical spacing between wattle rows for ~20 cm rolls. Steeper slopes need rows closer together; soft, loamy soils closer still.
| Property | Spacing between rows |
|---|---|
| 1V:1H slope | About 3 m |
| 1V:2H slope | About 6 m |
| 1V:3H slope | About 9 m |
| 1V:4H or flatter | About 12 m |
| Property | Coir wattle | Straw wattle | Plastic silt fence |
|---|---|---|---|
| Fill / material | Coir fibre | Straw | Polypropylene fabric |
| Durability | Several seasons | Usually one season | Until removed |
| After the job | Left in place to biodegrade | Left in place | Must be removed and disposed of |
| Vegetation | Plants establish in and behind it | Plants establish behind it | None |
| Wildlife | Natural fibre | Natural fibre | Entanglement risk |
Standard practice for this product. Your project drawings and local specifications always take priority.
Set out each row level across the slope, along the contour, at the spacing for your slope.
Dig a trench along the line, at least about 5 cm deep and deeper in soft soil, so water cannot run underneath.
Lay the wattle in the trench, butting ends tightly together, and press it into full contact with the soil.
Drive stakes through or beside the roll about every 1.2 m, then backfill and compact the uphill side.
Wattles and silt fences are used on and around sites where soil is exposed and runoff needs managing.
A roll of coir fibre held in netting, laid across a slope along the contour to slow runoff and catch the silt it carries.
A wattle lies on the ground across the slope. A silt fence stands upright on stakes, usually around the edge of a site or a drain, holding sediment back while water passes through.
On construction sites, cut slopes and embankments, around drain inlets and along site perimeters, wherever exposed soil could wash away.
Wattles are set in a shallow trench along the contour and staked through. Silt fences are fixed to stakes driven in along the line, with the base set into the ground.
Every order is planned personally, from choosing the grade to comparing ports and inland routes for the lowest landed cost. If you would rather talk your project through than fill in a form, reach out directly.
Product details, grades, packing and the Vazdor Group company profile, sent to your inbox.
Share the application, quantity and destination port. We reply within one working day.